Loading... Please wait...

Our Newsletter


Thermal Arc #W1004401 Fabricator 252i Mig/Tig/Stick Welding Package w/ W4013600 Tig Torch Kit.

  • Image 1
  • Image 2
Price:
$2,265.00
SKU:
TAW1004401TIG
Rating:
Bookmark and Share


Product Description

Thermal Arc #W1004401 Fabricator 252i Mig/Tig/Stick Welding Packag e w/ W4013600 Tig Torch Kit.

Sold as each.

252i.jpg

tigtorch.jpg

Includes:


* Fabricator 252i Power Supply
* Tweco® WeldSkill® 200 Amp Ground Clamp with 10 ft (3 m) Lead
* Victor® EDGE™ Argon Flow Gauge
* Tweco WeldSkill 200 Amp Electrode
Holder with 13 ft (4 m) Lead
* Drive Rolls:
.035" / .045" V Groove Lower & Flat Upper (Fitted)
.023" / .030" / .035" V Groove
.045" Flux Cored Roll
* Contact Tips (1 each):
.030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
* Outlet Guide, .023" (0.6mm)
* 15 ft (4.6 m) Tweco Spray Master® 250 Amp MIG Gun
* Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
* 9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug
* Operator’s Manual

* This model Includes W4013600 Tig Torch Kit.

Processes: MIG (GMAW)

Flux Cored (FCAW)

Lift TIG (GTAW)

STICK (SMAW)
Applications: Mechanical Contractors

Automotive Repairs & Customization

Petro / Chem Fabrication

Sheet Metal Fabrication / Light to Medium Fabrication

On-Site & Portable Welding Applications

Dairy Industry

Food / Beverage Industry

Farms & Ranches

Training Institutions

Maintenance & Repairs
Rated Output: 250A / 26.5V @ 40% Duty Cycle

200A / 24V @ 60% Duty Cycle

150A / 21.5V @ 100% Duty cycle
Max. Open Circuit Voltage:
72V DC
Amperage Range: 5-300 A
Wire Feed Speed: 67 - 700 ipm (1.7 - 17.8 m/min)
Weight: 65.3 lbs (29.6 kg)
Ordering Information: Part No: W1004401
Description: Fabricator 252i Package

Find Similar Products by Category


Write your own product review

Product Reviews

  1. Thoughly impressed with 252i

    Posted by Bobby Wilson / Wilson's Welding Services on 17th May 2012

    I had the opportuninty to run the ThermalArc 252i Fabricator through all of it's process capabilities. This machine is light weight, incorporates easy to use process control settings and comes with a built in wire feeder.
    The feature that I liked with GMAW process is that it creates a pinch off effect that eliminates that large ball on the end of electrode when finished with weld. This would make tack welding and hot restarts much better.
    The machine also features programmable spot and stitch for GMAW.
    TIG is Lift-arc and extremely stable smooth arc characteristics with a very easy to set down slope. Lowest setting is about 10 amps.
    I also used the Spoolgun and was pleased with it's performance also. It has the button to open drive rolls for very easy feeding of new spool. One MAJOR thing to REMEBER when using the spoolgun; Turn OFF the pitch setting that is used to blow off the ball on carbon wire, otherwise at the end of your puddle it will blow out the crater with aluminum wire. This is an EZ fix.
    I am a welding instructor at a high school and own my own welding businiess also; this machine is my choice for performance, multi-process capabilities and price.